Click on the image to check the artwork
PRODUCT DESCRIPTION:
This series are 2-part liquid silicone rubber suitable for injection molding processes, catalyzed by platinum.
KEY FEATURE:
1. Good rebound property, excellent thermal and cold stability (-60-250),
2. Good fluidity, easy to be injected, stable shrinkage rate,
3. At the temperature of 25 and in the condition of air-proof, the shelf life is 3 days after mixing A and B, the shelf life will decrease with the increasing of the temperature.
APPLICATION:
The series are suitable for making lining of computer keyboard
PACKAGING:
It is available in 20kg pails or 200kg drums
TYPICAL PROPERTIES:
| Appearance | Translucence |
| Viscosity(mps) | 65000~90000 |
| Hardness(Shore A) | 40 |
| Tensile strength(MPa) | 5.0~5.5 |
| Tear resistance(KN/m) | 15~18 |
| Elongation at break | 300%~330% |
| Linear shrinkage | 0.1% |
REMARK:
1. The product should be closed tightly, protected from light and moisture, the shelf life is 12 months
2. These figures are for reference only, please contact us for detail.
ABOUT US:
We are engaged in silicone rubber's R&D since 1996,there are experienced technicians and workers in our company,as well as advanced equipment.We produce almost all kinds of silicone rubber,which we believe must meet your possible requirements, no matter what you need to produce by silicone rubber.
What's more,our silicone rubber are environmental-friendly production,with high safety and no toxic.You can absolutely trust your choice with us.